 |
The mortar is then applied to the wall with the smooth end of a wide-toothed trowel, which after application is turned and the toothed end is drawn through the layer of mortar. |
|
 The tiles are pressed and twisted into the mortar so that 80% - 1 00% coverage of the back of the tiles is obtained. |
||
 Mortar covering adherence should be checked regularly by tiling a newly fixed tile away from the wall. |
||
Is a special cement based by dry mortar which is waterproof (for wet rooms), inorganic (cannot rot or decay), heat and frost proof (from -30C to + 150C), LIP has high elasticity and pull off resistance; see test results. For in and outdoor use, housing, swimming pools and industrial projects.
Applications Fixing and laying walls and floor tiles, marble, mosaic, stales, facing bricks, glass wool batts, rock wool batts, polystyrene veneers, concrete elements, rendered walls, decoration tile and blocks, gypsum boards, vinyl floor wood tiles on concrete components, light weight aggregate concrete, plastered walls, aerated concrete, plasterboard panels, waterproof playwood panels, painted surfaces, wall and floor vinyls, old tiles or terrazzo, and wherever extra adhesion and shear strength are needed. LIP Multi Tile Mortar is excellent for fixing tiles to concrete and light weight aggregate concrete subfloors and floors with embedded heating coils.
Directions for use Mix 5Kg powder of LIP Multi Tile Mortar with 1.2 liters of water while stirring. Remix after 10 minutes and apply at wall. The mix must be used within 4 hours of time. The base must be cleaned of dirt and dust to ensure optimum adherence. Realignment of tile can normally be done up to 15 minutes after fixing depending on the suction capacity of the base. Any remnants of mortar on the tiles can be removed easily before setting by washing with water
Consumption:
Approximately 1.5 to 2Kg of LIP Multi Tile Mortar covers one sq. meter. Use LIP Grout
to fill separations between the tiles after 24 hours.
Specification - LIP Multi Tile Mortar complies to ASTM C 48261 T, Din 18156 Teil 3, 5.2.6 B.S. 5385 : Pt. 2 1976 B.S. 5385 : Pt. 2 1978. LIP products are continually tested by Jutland Institute of Technology.
|
|
